I've hooked up the car via the serial port behind the dash, and tried looking at the software.
My goal is simply to change some of the displayed info (currently water temp, fuel, oil pressure (always 1).
However, once hooked up, the config software doesn't appear to load anything from the dash, just display a set of defaults. I've had a quick look through the Dash's own settings, but can't see anything that gives any info as to what the current settings are.
Does anyone who's already had a tinker have any idea what the car usually has for the settings, or has a settings file for the config software?
TIA
Dash2 settings
- John Scherrer
- Global Moderator
- Posts: 5124
- Joined: Sat Mar 07, 2009 1:20 pm
- Location: Willington, Bedford UK
- Contact:
Re: Dash2 settings
Hello Phil,
Here's the SPA Dash 2 Instruction Manual (attached below) - It implies that if you were to buy their product, it would be supplied with a CD ..
This link may help - it's the online SPA Help System - See the DASH2 menu subsection on 'Reflashing' referred to in the Instruction Manual
https://www.race-technology.com/wiki/in ... troduction
Disclaimer !
I've never had a DASH 2 and not tried what you're doing myself.
Hope it helps ..
Here's the SPA Dash 2 Instruction Manual (attached below) - It implies that if you were to buy their product, it would be supplied with a CD ..
This link may help - it's the online SPA Help System - See the DASH2 menu subsection on 'Reflashing' referred to in the Instruction Manual
https://www.race-technology.com/wiki/in ... troduction
Disclaimer !
I've never had a DASH 2 and not tried what you're doing myself.
Hope it helps ..
- Attachments
-
- DASH2 instruction manualv32.pdf
- (1.26 MiB) Downloaded 29 times
Atom 3 310 Supercharged (2011), Now Sold
Who is online
Users browsing this forum: No registered users and 2 guests