harnesses
harnesses
I was thinking of buying a nice new pair of 3" green Willans harnesses (to match the standard Atom green). It looks like the saloon club 4x4 ones are right for the car as I fitted in the Aton 2 (orange) I had a few years ago.
My question revolves around the fixing points. The standard Ariel fixings are eye bolt and a noisy rattling clip that people complain about. As I am about to buy new ones I was curious if anyone had just got belts with fastening bolts as you would have in a conventional car and as the style Willans supply for Caterham. This would be a custom feature but there appears to be various belts that they supply like this.
Is there a particular reason that clip in belts are used, its not like we clip them in and out on a regular basis.
My question revolves around the fixing points. The standard Ariel fixings are eye bolt and a noisy rattling clip that people complain about. As I am about to buy new ones I was curious if anyone had just got belts with fastening bolts as you would have in a conventional car and as the style Willans supply for Caterham. This would be a custom feature but there appears to be various belts that they supply like this.
Is there a particular reason that clip in belts are used, its not like we clip them in and out on a regular basis.
- Alex Brandon-Smith
- Posts: 1429
- Joined: Sat Oct 15, 2011 11:35 am
- Location: Christchurch, Dorset
- Contact:
Re: harnesses
Rocket Man, you can eliminate the rattles by buying a set of rubber grommets to fit into the harness points on the chassis. There is a thread somewhere for it. I have them and they are superb.
310=325! That'll be the Presidential Remap kicking in...
- autobackup
- Posts: 992
- Joined: Fri Aug 21, 2015 1:57 pm
- Location: Cyprus (+ Newbury)
- Contact:
Re: harnesses
I also have fitted these Neoprene Grommets - Part No. 13mm/PT 5mm DA13017050-1
They are a b****y pain to fit (a smidgin of washing up liquid helps) - but once fitted they are brilliant - no more rattling just blissful silence!
You can obtain a set from :
https://www.electricalcarservices.com/Product.aspx?ProductID=2387&strReferer=search&PPGR=0
Please note that it is much cheaper to buy a pack of 10 rather than 8 individually!
They are a b****y pain to fit (a smidgin of washing up liquid helps) - but once fitted they are brilliant - no more rattling just blissful silence!
You can obtain a set from :
https://www.electricalcarservices.com/Product.aspx?ProductID=2387&strReferer=search&PPGR=0
Please note that it is much cheaper to buy a pack of 10 rather than 8 individually!
Atom 3.5R (Cyprus)
Honda CRV 2.2 Ex Auto i-DTEC (Cyprus)
Suzuki Celerio 1.0 SZ4 (Cyprus)
Honda CRV Ex I-MMD eCVT Hybrid (UK)
Honda CRV 2.2 Ex Auto i-DTEC (Cyprus)
Suzuki Celerio 1.0 SZ4 (Cyprus)
Honda CRV Ex I-MMD eCVT Hybrid (UK)
Re: harnesses
I have seen and read the topics on grommets before but just curious why the ends of the harnesses are not just bolted in place. No rattling and looks better and dare I say perhaps lighter.
- autobackup
- Posts: 992
- Joined: Fri Aug 21, 2015 1:57 pm
- Location: Cyprus (+ Newbury)
- Contact:
Re: harnesses
R-Man
I have 2 colour schemes for my Atom (Porsche Riviera Blue & Pillarbox Red) and have acquired two sets of Willans 3" harnesses to match - so I just clip/unclip the the harness to match the scheme whenever I change the panels.
To have to bolt/unbolt the fittings each time would be a real pain!!
I have 2 colour schemes for my Atom (Porsche Riviera Blue & Pillarbox Red) and have acquired two sets of Willans 3" harnesses to match - so I just clip/unclip the the harness to match the scheme whenever I change the panels.
To have to bolt/unbolt the fittings each time would be a real pain!!
Atom 3.5R (Cyprus)
Honda CRV 2.2 Ex Auto i-DTEC (Cyprus)
Suzuki Celerio 1.0 SZ4 (Cyprus)
Honda CRV Ex I-MMD eCVT Hybrid (UK)
Honda CRV 2.2 Ex Auto i-DTEC (Cyprus)
Suzuki Celerio 1.0 SZ4 (Cyprus)
Honda CRV Ex I-MMD eCVT Hybrid (UK)
Re: harnesses
My two-penneth ....
If you need to take the bench seat out then it's handy having clipped harnesses, especially the 4 point ones as both ends of each section go though apertures in the seat.
Likewise, when washing the car, removing them is advisable as they take an age to dry.
Adrian
If you need to take the bench seat out then it's handy having clipped harnesses, especially the 4 point ones as both ends of each section go though apertures in the seat.
Likewise, when washing the car, removing them is advisable as they take an age to dry.
Adrian
Re: harnesses
Ah. Washing up liquid to help those little buggers go in. I will try that thanks
Just fitted two grommets so far and putting off the day for the others because theyve been so difficult
Just fitted two grommets so far and putting off the day for the others because theyve been so difficult
- autobackup
- Posts: 992
- Joined: Fri Aug 21, 2015 1:57 pm
- Location: Cyprus (+ Newbury)
- Contact:
Re: harnesses
All 12!!
Have you somehow got a third seat fitted?
Personally I've only got 8 ring bolts for seatbelts fitted to my Atom
Have you somehow got a third seat fitted?
Personally I've only got 8 ring bolts for seatbelts fitted to my Atom
Atom 3.5R (Cyprus)
Honda CRV 2.2 Ex Auto i-DTEC (Cyprus)
Suzuki Celerio 1.0 SZ4 (Cyprus)
Honda CRV Ex I-MMD eCVT Hybrid (UK)
Honda CRV 2.2 Ex Auto i-DTEC (Cyprus)
Suzuki Celerio 1.0 SZ4 (Cyprus)
Honda CRV Ex I-MMD eCVT Hybrid (UK)
Re: harnesses
Not a bad shout about a third seat, save any argument about which kid to take out
If you want to fit the anti-rattle grommets to the lap eye bolts as well as shoulder then I recommend these extenders to give the lap and anti-sub each their own eye. Smokin recommended.
http://www.msar.co.uk/motorsports/Harnesses/Harness-Accessories/Harness-Hardware/Schroth-B23A-Bracket_88.html
88_0_Schroth-B23A-Bracket.jpg (191.89 kB, 650x650 - viewed 8 times.)
If you want to fit the anti-rattle grommets to the lap eye bolts as well as shoulder then I recommend these extenders to give the lap and anti-sub each their own eye. Smokin recommended.
http://www.msar.co.uk/motorsports/Harnesses/Harness-Accessories/Harness-Hardware/Schroth-B23A-Bracket_88.html
88_0_Schroth-B23A-Bracket.jpg (191.89 kB, 650x650 - viewed 8 times.)
Last edited by IanG on Sat May 06, 2017 5:21 am, edited 1 time in total.
Ferrari 328 Audi A5
Re: harnesses
I ordered 4 point 3" saloon club harnesses in green but they only have 2" in green so they did 6 point 2" for the same price for me. Very pleased with them as they not only look good and compliment the car but are easier to get into than the standard 2" supersport harnesses and more comfortable to wear than the 3" belts (I fitted orange 3" in my Atom 2). Just need to fit the crotch straps yet
Re: harnesses
first proper run out this year
having problems posting pictures for some reason
having problems posting pictures for some reason
Last edited by Rocket Man on Sat May 27, 2017 6:17 pm, edited 1 time in total.
- John Scherrer
- Global Moderator
- Posts: 5124
- Joined: Sat Mar 07, 2009 1:20 pm
- Location: Willington, Bedford UK
- Contact:
Re: harnesses
Pictures ..
Last edited by John Scherrer on Sat May 27, 2017 5:55 pm, edited 1 time in total.
Atom 3 310 Supercharged (2011), Now Sold
Who is online
Users browsing this forum: No registered users and 3 guests