Page 1 of 2
K&N filter ?
Posted: Sun Nov 23, 2014 1:56 pm
by Atomicandy
Is this the right K&N air filter :
33-2748
Dimensions look a little too big on the web site ?
Cheers
Andy
Re: K&N filter ?
Posted: Sun Nov 23, 2014 5:01 pm
by smokin
I use ITG which I believe is what the factory use but with their logo stamped on.
The ITG part is WB-315 which is 238mm by 161mm
The K&N 33-2748-1 is showing 248mm by 171mm
As you say, looks too big.
However, it needs to fit Alpha 145 1.8 16V (03/97>) + 2.0 (01/96>) and 146 1.8 16V (03/97>) + 2.0 (04/96>) and the K&N 33-2748-1 says it does so I'm guessing it's down the where they're measuring from/to
I think 33-2748-1 will fit but I've never tried
Re: K&N filter ?
Posted: Sun Nov 23, 2014 5:58 pm
by Atomicandy
Cheers 4 the reply
Re: K&N filter ?
Posted: Sun Nov 23, 2014 7:40 pm
by meladdo
After seeing Jaylatti's air intake mod - I wonder just how much the engine is being starved of air by using the stock intake....?
Re: K&N filter ?
Posted: Sun Nov 23, 2014 8:45 pm
by Northnoble
[quote="Atomicandy"]
Cheers 4 the reply
[/quote]
If you buy one.....let the forum know if it fits please
Re: K&N filter ?
Posted: Sun Nov 23, 2014 8:50 pm
by Atomicandy
Will do. Surprised no one else has yet
Re: K&N filter ?
Posted: Sun Nov 23, 2014 9:33 pm
by Northnoble
Just did a search...that would appear to be the right one according to ChuckUK
Re: K&N filter ?
Posted: Thu Nov 27, 2014 8:42 am
by Atomicandy
Been looking through US forums. It appears the 33-2282 will be a better fit.
Will try this one
Re: K&N filter ?
Posted: Thu Nov 27, 2014 8:52 am
by smokin
Dimensions certainly look closer. Just checked the vehicles that one is fitted to and this is hopefully the only part the Atom and SUZUKI LIANA have in common
Please let us know how you get on with it
Re: K&N filter ?
Posted: Mon Dec 08, 2014 12:16 pm
by Atomicandy
I can confirm the 2282 is a perfect fit
Re: K&N filter ?
Posted: Mon Dec 08, 2014 12:52 pm
by smokin
Cheers Andy. I'll be giving K&N a go next time.
Re: K&N filter ?
Posted: Tue Mar 03, 2015 12:41 am
by fieldl
[quote="meladdo"]
After seeing Jaylatti's air intake mod - I wonder just how much the engine is being starved of air by using the stock intake....?
[/quote]
A lot the 180 degree bend in the intake pipe seems to be restrictive and not optimal. Intake and manifold are the two bottlenecks I have that I need to resolve.
Re: K&N filter ?
Posted: Sat Apr 16, 2022 9:43 pm
by Go4Gold
Hi all, pretty old topic but it helped me a lot to find a ne air filter because to original one fell apart. The 2282 was not available so I ordered the K&N 33-5050. This one seems to fit also pretty well. But I´m wondering what I should use to seal/glue it onto the intake?
Re: K&N filter ?
Posted: Mon Apr 25, 2022 6:07 pm
by Atlarge
[mention]Go4Gold[/mention] I’d use some high temp quality silicon, same as the factory I believe....
Re: K&N filter ?
Posted: Mon Apr 25, 2022 6:11 pm
by Go4Gold
They are using Tiger Seal (PU) and I used now Sikalfex 221 (also PU)