K&N filter ?

[Atomicandy]

Is this the right K&N air filter :

33-2748

Dimensions look a little too big on the web site ?

Cheers

Andy

[smokin]

I use ITG which I believe is what the factory use but with their logo stamped on.

The ITG part is WB-315 which is 238mm by 161mm

The K&N 33-2748-1 is showing 248mm by 171mm

As you say, looks too big.

However, it needs to fit Alpha 145 1.8 16V (03/97>) + 2.0 (01/96>) and 146 1.8 16V (03/97>) + 2.0 (04/96>) and the K&N 33-2748-1 says it does so I'm guessing it's down the where they're measuring from/to

I think 33-2748-1 will fit but I've never tried

[Atomicandy]

Cheers 4 the reply 

[meladdo]

After seeing Jaylatti's air intake mod - I wonder just how much the engine is being starved of air by using the stock intake....?

[Northnoble]

[quote="Atomicandy"]
Cheers 4 the reply 
[/quote]

If you buy one.....let the forum know if it fits please

[Atomicandy]

Will do. Surprised no one else has yet

[Northnoble]

Just did a search...that would appear to be the right one according to ChuckUK

[Atomicandy]

Been looking through US forums. It appears the 33-2282 will be a better fit.

Will try this one

[smokin]

Dimensions certainly look closer. Just checked the vehicles that one is fitted to and this is hopefully the only part the Atom and SUZUKI LIANA have in common  Please let us know how you get on with it

[Atomicandy]

I can confirm the 2282 is a perfect fit

[smokin]

Cheers Andy. I'll be giving K&N a go next time.

[fieldl]

[quote="meladdo"]
After seeing Jaylatti's air intake mod - I wonder just how much the engine is being starved of air by using the stock intake....?
[/quote]

A lot the 180 degree bend in the intake pipe seems to be restrictive and not optimal.  Intake and manifold are the two bottlenecks I have that I need to resolve.

[Go4Gold]

Hi all, pretty old topic but it helped me a lot to find a ne air filter because to original one fell apart. The 2282 was not available so I ordered the K&N 33-5050. This one seems to fit also pretty well. But I´m wondering what I should use to seal/glue it onto the intake?

[Atlarge]

[mention]Go4Gold[/mention] I’d use some high temp quality silicon, same as the factory I believe....

[Go4Gold]

They are using Tiger Seal (PU) and I used now Sikalfex 221 (also PU)