Steering Wheel Wall Mount

[Badders]

Lockdown 2.1 has presented many opportunities for us all to waste a bit of time (except enjoying the car, it seems). Between improving my alcohol tolerance and sleeping, I thought it would be an excellent idea to store my Atom steering wheel out of the way on the wall of the office, allowing me to stare at it and wish it was attached to the car with me sitting behind it. As such, I knocked up a plastic boss that fits the lifeline quick release adapter, with 4mm holes for screws. Functional? Yes. Pointless? Probably. Cheap? Absolutely.

I can't be too sure if the quick release is the same across the range, but my Atom 4 has the type you can see in the photos with a 20mm spigot. May be useful for Nomad and 3/3.5 wheels too.

If anyone would like one, please let me know and I'll gladly stick you one in a jiffy bag.

IMG_20210110_104245.jpg (3.78 MiB) Viewed 699 times

IMG_20210110_104313.jpg (4.18 MiB) Viewed 699 times

IMG_20210110_105443.jpg (2.45 MiB) Viewed 699 times

[Jerry]

Badders that's a great idea. I will happily take one off you. Let me know the cost and will transfer it to you.

Best Jerry

[apr1962]

Badders,

great idea, could I have one also please. If you let me know the cost, I can transfer money across as well.

Best regards
Andrew

[Badders]

No problem chaps. I've got white filament loaded presently. Is that OK with both of you? Otherwise, the grey in the photos, transparent red or transparent blue are available. Let me know what you'd prefer.

[apr1962]

I would prefer grey if that’s ok

Thanks
Andrew

[Badders]

I would prefer grey if that’s ok

Thanks
Andrew

Sure, no problem. If you and [mention]Jerry[/mention] would like to PM me your addresses, I'll get them sent.

[ArBrMD]

Wow That looks great!!

Any possibility to send me the 3D model? I have my own 3D printer.

Sending it to Belgium would be a stupid expense

[Lew]

Hello fellow maker !

I found this one some time ago on thingiverse:
https://www.thingiverse.com/thing:4584312

It works okay. do you mind sharing yours ?

I live in Belgium as well ArBrMD, could be a good opportunity to meetup ;-)

[phil4]

Hi Badders, I'd love one of these, if you have either colour is fine, pref for white though.

Let me know cost and I'll send over.

Many thanks

[Valey80]

Morning - would love one please - white perfect

As with everyone else, let me know cost and where to send the payment
Thanks

[Nick E]

Hi Badders,

That's fantastic, could I please request one in grey

I'll PM you my details.

Much Thanks
Nick

[Badders]

Two white ones just off the printer. Will get them out to you [mention]Valey80[/mention] and [mention]phil4[/mention]. Just about to start the grey.

[mention]Lew[/mention] and [mention]ArBrMD[/mention]. I'll PM you the stl file, along with a 3mf file for PETG 0.4mm nozzle, 0.1mm layer. I printed solid around screw holes, and 5 walls around the recess for the bearings.

[K20A2]

This is a great idea and the first time I regret, that I choosed a different QR to replace the SPA one.

[Lew]

Great [mention]Badders[/mention] ! Many thanks !

[Luckky]

Wow [mention]Badders[/mention] id also like one of these please, white or grey but I, not too fussed. Awesome idea and maybe a good sideline too!