Alignment specs

[Clockwerks]

So, at the last cars and coffee, I was asked to do a photo shoot, and in typical fashion the hoonage escalated till I stuffed it in a ditch!
Nothing damaged or bent as far as I can tell, but my steering wheel is a bit off now, so I knocked it out of alignment a bit.
The specs I found elsewhere on here gives me front toe out of 1mm and 3 to 7mm toe in the rear.
Any other info I might need?
Thanks

[MDifficult]

If it's an Atom 3/3.5, you've probably done this but it's worth checking if you're out of steering alignment that you've not bent the bit of the upright that attaches to the steering arm. I had a small 'off' in a gravel trap and it bent that bit of the upright, giving me wonk steering. New upright on and it was fixed.

[Clockwerks]

Sorry, it’s a nomad tactical…

[JT1020]

Added a photo for camber and toe etc. hope this helps

[Clockwerks]

Any chance you have the same sheet for a nomad?