overheating due to plant life
overheating due to plant life
New Nomad owner in Suffolk here (anyone else out there?). Me and my son have been hooning around the farm but the rad / cooling fan is getting quickly clogged with all the light rubbish that comes off the thistles and grasses this time of year --> overheating and fuse blowing. Anyone else had this problem or even found a solution? Can't really block the air going in for obvious reasons and it happens within a very short time of getting stuck in. Crewkerne have not had seen problem before.
Re: overheating due to plant life
If Ariel haven't seen it before, there clearly won't be a factory designed/sactioned solution.
Have you looked at fitting a metal mesh ahead of the rad/fan?
Motorbikes often have radiator guards available, these for example: http://www.bikenation.co.uk/parts/bike- ... tor-guards
Where they have the fan behind the radiator it's of course a different proposition. However if you were feeling handy, I'm sure with some suitable mesh (local DIY or craft store) could be made to measure and fitted over.
The above may be a useless idea, but since I'd seen it on bikes, thought I'd share.
Have you looked at fitting a metal mesh ahead of the rad/fan?
Motorbikes often have radiator guards available, these for example: http://www.bikenation.co.uk/parts/bike- ... tor-guards
Where they have the fan behind the radiator it's of course a different proposition. However if you were feeling handy, I'm sure with some suitable mesh (local DIY or craft store) could be made to measure and fitted over.
The above may be a useless idea, but since I'd seen it on bikes, thought I'd share.
Re: overheating due to plant life
I've not had this problem, but have been thinking about adding a little extra protection up front against stones and what not. The radiator is fairly exposed.
The idea involves attaching black scrim netting to the front bumper frame with some black velcro loops / cable ties. Not sure if you have the front bumper or not, but it would be an ideal place to fix either mesh or netting I reckon.
The idea involves attaching black scrim netting to the front bumper frame with some black velcro loops / cable ties. Not sure if you have the front bumper or not, but it would be an ideal place to fix either mesh or netting I reckon.
- John Scherrer
- Global Moderator
- Posts: 5124
- Joined: Sat Mar 07, 2009 1:20 pm
- Location: Willington, Bedford UK
- Contact:
Re: overheating due to plant life
I'm guessing the fan fuse is blowing when the fan blades stall due to debris being lodged between the blades and the casing.
So, with no fan it then overheats.
If you can somehow, stop the fan blades from stalling you've fixed it!
Is it possible to mount the fan assembly further forward of the radiator using some suitable spacers to give a bit more clearance?
So, with no fan it then overheats.
If you can somehow, stop the fan blades from stalling you've fixed it!
Is it possible to mount the fan assembly further forward of the radiator using some suitable spacers to give a bit more clearance?
Atom 3 310 Supercharged (2011), Now Sold
Re: overheating due to plant life
Thanks Guys, I try some scrim, hope that doesn't clog up too but should give the fan some respite, it seems to be a particular problem with the light fluff coming off thistles which gets right into the rad itself past the fan housing. Normal long grass etc seems fine.
Re: overheating due to plant life
You may have to invest in a pair of ladies tights to form a barrier then Paul.
A good denier gusset has been known to stop many an intruder, yet still prove breathable.
I apologise in advance. It's late...
A good denier gusset has been known to stop many an intruder, yet still prove breathable.
I apologise in advance. It's late...
Re: overheating due to plant life
Appreciate that advice, will promulgate on the other forum I seem to spend too much time on
Re: overheating due to plant life
I must say Thistle Fluff hasnt been a problem for us.. yet!
My suggestion would be to use an air line or hose pipe from the back face of the radiator to push the fluff / other detritus out from behind.
I know this probably isnt hugely helpful, as there arent usually air lines / hoses in the middle of fields...
be wary about putting fine mesh etc over the radiator, it can reduce air flow A LOT. The best thing might be a 'grille' rather than mesh?
My suggestion would be to use an air line or hose pipe from the back face of the radiator to push the fluff / other detritus out from behind.
I know this probably isnt hugely helpful, as there arent usually air lines / hoses in the middle of fields...
be wary about putting fine mesh etc over the radiator, it can reduce air flow A LOT. The best thing might be a 'grille' rather than mesh?
Who is online
Users browsing this forum: No registered users and 5 guests