Atom 4 Crutch Harness

[Anon]

I was getting paranoid about my kids slipping out of the harnesses so this evening I fitted the crutch strap. Atom 4 has a separate pre-drilled and welded in nut for additional eye bolts so you can attach the crutch strap to which is nice.

Pretty pleased with this.

20200626_212755.jpg (4.96 MiB) Viewed 499 times

[phil4]

That’s a handy improvement on the 3.5. On that you attached both straps to the same fixing.


Sent from my iPhone using Tapatalk

[apr1962]

Simon,

Please can I ask what the red is in you footwell?

Thanks
Andrew

[stupot]

The 3.5 chassis should have the separate crutch strap mounts as I had them on my car.

[Anon]

Simon,

Please can I ask what the red is in you footwell?

Thanks
Andrew

Andrew,

The red you can see are the floor mats I made to avoid small stones scratching the tub. Kids get in and out of my car so I would prefer to keep the tub looking nice. The carpet also looks cool I think and makes it much more comfortable when moving your feet around.

20200606_153655.jpg (4.91 MiB) Viewed 435 times

Cheers
Simon

[phil4]

The 3.5 chassis should have the separate crutch strap mounts as I had them on my car.

Odd, defo weren’t any on mine. Had to bolt them using the same bolt as the main belt.

Each one different I guess.


Sent from my iPhone using Tapatalk

[apr1962]

Thanks Simon,

I think I'll do that to mine when it eventually arrives. Are they glued down or similar?

Thanks

[Anon]

It's quite amazing how much interest these mats have had lol. They are dead easy to make and very cheap also. Originally I asked a company to make me some, but when I received the price of around £500 I fell off of my chair so decided to make them myself, they are a commodity after all. In terms of whether they slide around, they didn't really because the thin felt almost like carpet is glued to a 3mm rubber base. This base gives the mat durability and naturally allows it to "stick" to the tub's surface.

I did not want to glue them in, this would make a mess of the tub and it would be hard to remove them. I made a black set as well although I'm not fond of those and just ordered some yellow carpet so I will make a yellow version as well.

That said, I wasn't entirely happy with just the mats sitting there freely. So today, I just added some velcro tabs to secure them. So they definitely will not move now. This way I can easily add new colours and if I want to get rid of the mat's, I can just pull up the velcro tab no problem.

20200627_182208.jpg (3.27 MiB) Viewed 397 times

20200627_182625.jpg (4.71 MiB) Viewed 397 times

20200627_182834.jpg (4.55 MiB) Viewed 397 times

mat-underside.png (1.3 MiB) Viewed 397 times