Dymag Refurbished
Dymag Refurbished
Last September I brought a set of dymags
I noticed they were Gloss Black
After a few outings I noticed that the lacquer was chipping of
As work has taken over I through a good time to have them refurbished
Off to Steve @http://tpcs-magnesium-refurbs.co.uk/
I noticed they were Gloss Black
After a few outings I noticed that the lacquer was chipping of
As work has taken over I through a good time to have them refurbished
Off to Steve @http://tpcs-magnesium-refurbs.co.uk/
- Attachments
-
- Wheels were chemically stripped first... Very thick paint on all!! The rears I reckon at some point have been stripped/blasted in the past!!
- IMG_0121.JPG (419.81 KiB) Viewed 1332 times
-
- Once we removed the old powder you can clearly see signs of the old white primer paint that has filled the roughed area mainly on the outside of the wheel
- IMG_0122.JPG (673.88 KiB) Viewed 1332 times
-
- Next stage was media blast to remove any oxides and paint
- IMG_0123.JPG (360.38 KiB) Viewed 1332 times
-
- Followed by NDT crack check.. Nothing bad showed up under the UV light so all good to go..
- IMG_0124.JPG (402.33 KiB) Viewed 1332 times
-
- They have all been chromated now.. Next stage (tomorrow) will be my pre-heat process followed by powder coat in my satin black.
- IMG_0125.JPG (378.94 KiB) Viewed 1332 times
-
- Posts: 53
- Joined: Sat Dec 29, 2018 1:55 pm
- Contact:
Re: Dymag Refurbished
So good he’s on my third set of wheels I’ve just picked up a set of Dymags I’d left after picking them up on here a couple of months back!
Steve work is first class and he’s a pleasure to deal with, These have just had two coats of ceramic wheel on to keep the brake dust at bay
Steve work is first class and he’s a pleasure to deal with, These have just had two coats of ceramic wheel on to keep the brake dust at bay
- Attachments
-
- 3C2E0CB6-F7D4-4D97-9729-9424701A91EF.jpeg (3.52 MiB) Viewed 1277 times
-
- 96E57E60-D8F6-49C7-8EEF-CBEFD0F65A05.jpeg (3.7 MiB) Viewed 1277 times
-
- FA6DDF77-FDA7-46FC-9320-6A814C977824.jpeg (3.8 MiB) Viewed 1277 times
Re: Dymag Refurbished
Lovely job, top notch.
Cheers,
Hedge
Cheers,
Hedge
Re: Dymag Refurbished
I have one to be done!
Re: Dymag Refurbished
All back tyres fitted this morning
Really please with the finish
Really please with the finish
- Attachments
-
- IMG_9248.JPG (2 MiB) Viewed 768 times
-
- IMG_9247.JPG (2.05 MiB) Viewed 768 times
-
- IMG_9246.JPG (1.85 MiB) Viewed 768 times
-
- IMG_9245.JPG (1.94 MiB) Viewed 768 times
-
- IMG_9244.JPG (2.01 MiB) Viewed 768 times
Re: Dymag Refurbished
Sweet
Re: Dymag Refurbished
Did you have the same problem I had, in that as soon as I applied the wheel protector, the Dymag stickers came off? Not that it matters, as I prefer them without. Steve's a good bloke.
Sent from my VTR-L09 using Tapatalk
Sent from my VTR-L09 using Tapatalk
2008 Supercharged Atom 3, Tesla Model 3 Long Range
Re: Dymag Refurbished
No stickers
Not a great fan
He certainly knows his stuff
Not a great fan
He certainly knows his stuff
Who is online
Users browsing this forum: No registered users and 19 guests