Hello from France

Come here to say hello and get up to speed with how to make the most of the forum.
User avatar
thomas_fr
Posts: 126
Joined: Wed Mar 22, 2017 12:39 pm
Contact:

Re: Hello from France

Post by thomas_fr » Thu Jun 15, 2017 6:56 am

A few upgrades :

Fog + plate lighting (still missing the reverse light, and a 3rd brake light) :

Image

Image

It's a Led rain light, that i use as fog light, with a small led plate lighting hidden under.

____________

Also, i needed an iPhone support to have Nav and speed controls alerts, so i draw one with Autodesk Fusion, 3D printed 4 or 5 times to have the perfect fitment, and :

Image

Image

Image

Just slide it in, and it does not move : perfect  ;)

User avatar
911tom
Posts: 314
Joined: Sat Jul 09, 2016 11:57 pm
Contact:

Re: Hello from France

Post by 911tom » Thu Jun 15, 2017 9:02 pm

Nice work Thomas! Really nice to see guys designing there own bits for these cars.  :tu:
Ariel Atom 4 350hp
Porsche 996 turbo for straight line speed
350BHP Astra van
Porsche cayenne to transport the family

User avatar
thomas_fr
Posts: 126
Joined: Wed Mar 22, 2017 12:39 pm
Contact:

Re: Hello from France

Post by thomas_fr » Tue Jun 27, 2017 11:29 am

I had troubles since a month with the engine misfiring at high load/rpm, and going fine after,

so i began by changing the spark plugs : same problem
then, i realised a was low on fuel, so i topped, and same problem,

then, i changed the fuel filter : same problem

And a week after, the problem was more present, it was sometimes putting the car in error mode, no power, no revs : i had to switch off/switch on and if was running fine, for a few minutes, ...

So i decided to change the 4 coils (i have a spare K20a2 engine, so easy to swap parts/sensors) : same problem

I swapped the Map sensor : same problem

I swapped the throttle position sensor : same problem

>:(

So i decided to install the OBD kit i bought a month ago (i should have begin with this...), it was very easy (a 30min job).

And the OBD told me that the crank position sensor was faulty, so i swapped it :

The engine is now running perfectly  :tu:

The lesson here is to install the OBD kit before trying to change all engine sensors  ;D

User avatar
thomas_fr
Posts: 126
Joined: Wed Mar 22, 2017 12:39 pm
Contact:

Re: Hello from France

Post by thomas_fr » Tue Aug 08, 2017 8:44 am

One month after, it's not so simple :(

It seems that my loom is faulty, not the sensor.
I guess the sensor swapping resolved the issue for a moment since we touched the loom.

I will try to fix the loom or swap it (i have a spare K20A2 full wiring loom, and it seems that Ariel did not modify that loom, so i should try to swap it).

User avatar
thomas_fr
Posts: 126
Joined: Wed Mar 22, 2017 12:39 pm
Contact:

Re: Hello from France

Post by thomas_fr » Mon Jun 04, 2018 9:52 am

Some news,

this car was sold in november to a german buyer,
and i bought another one in March ???

Some fresh pics :

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

User avatar
Sir Nick
Posts: 1554
Joined: Tue Sep 06, 2011 2:41 pm
Location: Yate, Bristol, UK
Contact:

Re: Hello from France

Post by Sir Nick » Mon Jun 04, 2018 5:11 pm

Great photos!

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests