I installed the new speedo sensor today and test drove the car and the speedo worked. There are 2 wires coming off the sensor. If I had mixed up the wires would the speedo still have worked?
My speedo read around 71 mph at 3000 rpm in 5th gear. Can someone please confirm if this is the correct speed for the gear and rpm?
My speedo sensor was char grilled from the exhaust leak and I was wondering if I have to re-calibrate the speedo or just install the new sensor?
cheers
Installed new speedo sensor and connector with pigtail
Re: Installed new speedo sensor and connector with pigtail
Sounds about right...
Borrow a portable GPS if you need to calibrate acurately...
Borrow a portable GPS if you need to calibrate acurately...
Re: Installed new speedo sensor and connector with pigtail
[quote="Nicholas"]
Sounds about right...
Borrow a portable GPS if you need to calibrate acurately...
[/quote]
Thanks Nick. Should have thought to use my Garmin.
cheers
Sounds about right...
Borrow a portable GPS if you need to calibrate acurately...
[/quote]
Thanks Nick. Should have thought to use my Garmin.
cheers
Re: Installed new speedo sensor and connector with pigtail
or use a ODO and watch... and a straight bit of road...
Who is online
Users browsing this forum: No registered users and 1 guest