Atom 3.5R immobiliser problem!

[Bybarth]

Immobilizer problem!
Is this the antenna for the immobiliser?
Can't deactivate my immobiliser in my 3.5R.
Anybody familiar whit how it should look?
It looks really strange whit only one cord connected?

20190914_132531.jpg (1.78 MiB) Viewed 310 times

[Bybarth]

20190914_140435.jpg (1.56 MiB) Viewed 307 times

Closeup.

[phil4]

Yes, that the immobiliser antennae, I'd solder it back on, and then perhaps get a replacement next week.

[autobackup]

My Atom developed a similar problem after finishing (luckily!) an average time rally - it simply refused to arm the ignition and I had to get a tow home!

The consensus on this forum was that it was likely to be the antenna which can rupture internally due to heat/vibration by becoming brittle.

So I acquired a new antenna - to no avail - in the end I had to replace the complete immobiliser itself which had failed internally.

This is not a problem as they are simple (plug'n'play) and relatively cheap to buy.

You can check the previous thread here : viewtopic.php?f=17&t=16569&hilit=immobiliser

Link to the Sterling Website : http://toadalarm.com/product/sterling-e ... mobiliser/

I have also attached a .pdf of the Sterling Excel spec sheet

Sterling Excel Immobilier spec sheet.pdf

(60.73 KiB) Downloaded 18 times

[Bybarth]

It's alive
I soldered the wires and now it works.