Page 1 of 1
Atom (4) on a 2 post lift? Possible or not?
Posted: Wed Dec 21, 2022 12:51 pm
by speedmachine
As per title, anyone ever had an atom on a 2 post? I allready have very long arms on it. I would think rear underneath the engine and front on the tube from wheel to chassis, close to the mounting point at the chassis side?
Or will the wheels be in its way?
Re: Atom (4) on a 2 post lift? Possible or not?
Posted: Sat Dec 24, 2022 6:15 pm
by AMH 142
Hi Speedmachine,
Mine works just fine, front as you suggest and the rear on the chassis joint (not engine) where the little bracing piece is. This just misses the intercooler/fuel tank.What sort have you got, or are getting?
Merry Christmas, Aidan
Re: Atom (4) on a 2 post lift? Possible or not?
Posted: Sat Dec 24, 2022 7:16 pm
by speedmachine
AMH 142 wrote: ↑Sat Dec 24, 2022 6:15 pm
Hi Speedmachine,
Mine works just fine, front as you suggest and the rear on the chassis joint (not engine) where the little bracing piece is. This just misses the intercooler/fuel tank.What sort have you got, or are getting?
Merry Christmas, Aidan
This is my lift:
https://www.twinbusch.nl/product_info.p ... cts_id=249
I have an atom 4 incoming, so couldnt try myself, but wanted to make sure it works
Re: Atom (4) on a 2 post lift? Possible or not?
Posted: Sat Dec 24, 2022 11:02 pm
by AMH 142
- Screenshot 2022-12-24 at 20.55.57.png (617.41 KiB) Viewed 1776 times
Hi,
Attached is mine. I can't see any reason yours won't work. If no-one on here has experience of yours then by all means PM me and I can take some measurements of the pick-up/jack points.
Good luck, Aidan
Re: Atom (4) on a 2 post lift? Possible or not?
Posted: Sun Dec 25, 2022 11:28 am
by speedmachine
Thanks for this, I’m pretty sure it works if yours works, perfect stuff