Page 1 of 3
In an attempt to lose some weight on the Atom 4...
Posted: Wed Jul 29, 2020 4:57 pm
by Anon
Re: In an attempt to lose some weight on the Atom 4...
Posted: Wed Jul 29, 2020 7:11 pm
by curvedvision
I’ve got to admit that these do indeed improve the final finish of the car. Good work.
Sent from my iPhone using Tapatalk
Re: In an attempt to lose some weight on the Atom 4...
Posted: Wed Jul 29, 2020 8:39 pm
by Anon
Thanks. I think so to as well. It was as if the car was made for these 14mm head titanium bolts because they have these 14mm rubber washers. So now you can't see the washers.
It's basically a total of 23 bolts. I have a drawing I made with all the sizes required if anyone wants it. They are all 14mm M6 1mm pitch dome bolts, it's quite common to use these dome shape bolts for aesthetic purposes. You can also spec this at build time as well.
Re: In an attempt to lose some weight on the Atom 4...
Posted: Wed Jul 29, 2020 8:43 pm
by Peter255
Simon,
They look good!
If you don't mind me asking, how much were they? I am interested....
Cheers
Peter
Re: In an attempt to lose some weight on the Atom 4...
Posted: Wed Jul 29, 2020 9:14 pm
by Karl V
Great work Simon!
Any chance you could post a link to the specific bolts you ordered from ProBolt?
Re: In an attempt to lose some weight on the Atom 4...
Posted: Wed Jul 29, 2020 9:32 pm
by Anon
Sure, I will put together a list of links to the bolts you need with my dodgy drawing tomorrow.
Price wise it was about £195 for the lot. It's a lot of money but the results are much nicer than stock, plus a lot cheaper than at build if you don't mind wrenching yourself.
Re: In an attempt to lose some weight on the Atom 4...
Posted: Wed Jul 29, 2020 9:47 pm
by hamtt
Chaps I can get the titanium bolts significantly cheaper from some of our suppliers, I can't remember the prices but I got some several years ago for my Atom 2 and they were a lot cheaper than pro bolt.
I was planning on doing a titanium bolt back anyway but not got around to checking all the sizes yet but I'll be happy to supply the forum members pretty much at cost if you can wait. If someone can supply the sizes/colours/quantities it'll speed the process a fair bit as I'm the bottleneck at work at the moment because of the outstanding number of jobs going on at the moment requiring my input.
Re: In an attempt to lose some weight on the Atom 4...
Posted: Thu Jul 30, 2020 9:14 am
by Anon
All screws are:
Titanium in black (or another colour if you prefer of course)
Pay attention to whether you have a footrest or not below. When you have a footrest on the passenger side, the bolts are longer. I did not replace the stainless nuts.
Dome type M6 (6mm)
1mm pitch
4mm allen key
16mm dome head
3.7mm head height
Grade 5 titanium (approx 91% pure titanium)
Right tub:
16mm
16mm
20mm
16mm
Left tub
16mm
35mm (only if you have the foot rest otherwise 16mm)
40mm (only if you have the foot rest otherwise 20mm)
16mm
Left rear body (fuel tank side):
2 x 20mm
Right rear body:
2 x 20mm
Channel:
2 x 40mm
2 x 25mm
1 x 30mm
Dash:
2 x 25mm
1 x 16mm
Steering wheel:
3 x 16mm
With passenger foot rest:
9 x 16mm:
https://www.pro-bolt.com/titanium-dome- ... 00mmx16mm/
5 x 20mm:
https://www.pro-bolt.com/titanium-dome- ... 00mmx20mm/
1 x 35mm:
https://www.pro-bolt.com/titanium-dome- ... 00mmx35mm/
3 x 40mm:
https://www.pro-bolt.com/titanium-dome- ... 00mmx40mm/
4 x 25mm:
https://www.pro-bolt.com/titanium-dome- ... 00mmx25mm/
1 x 30mm:
https://www.pro-bolt.com/titanium-dome- ... 00mmx30mm/
Without passenger foot rest:
10 x 16mm:
https://www.pro-bolt.com/titanium-dome- ... 00mmx16mm/
6 x 20mm:
https://www.pro-bolt.com/titanium-dome- ... 00mmx20mm/
2 x 40mm:
https://www.pro-bolt.com/titanium-dome- ... 00mmx40mm/
4 x 25mm:
https://www.pro-bolt.com/titanium-dome- ... 00mmx25mm/
1 x 30mm:
https://www.pro-bolt.com/titanium-dome- ... 00mmx30mm/
Here is a dodgy picture - make sure you check this against the list above to make sure I made no mistake. And this drawing is for a footrest.
- Titanium screws sketch.png (203.32 KiB) Viewed 1136 times
In an attempt to lose some weight on the Atom 4...
Posted: Thu Jul 30, 2020 9:17 am
by Alistairbuchanan
Good work Simon....just need my 4
Sent from my iPhone using Tapatalk
Re: In an attempt to lose some weight on the Atom 4...
Posted: Thu Jul 30, 2020 9:24 am
by Karl V
Oooohhhh. they do pink bolts too
Thanks Simon - great work!
Re: In an attempt to lose some weight on the Atom 4...
Posted: Thu Jul 30, 2020 9:25 am
by Anon
Alistairbuchanan wrote: ↑Thu Jul 30, 2020 9:17 am
Good work Simon....just need my 4
Sent from my iPhone using Tapatalk
When do you go into build?
Re: In an attempt to lose some weight on the Atom 4...
Posted: Thu Jul 30, 2020 9:26 am
by Alistairbuchanan
simonrhart wrote:Alistairbuchanan wrote: ↑Thu Jul 30, 2020 9:17 am
Good work Simon....just need my 4
Sent from my iPhone using Tapatalk
When do you go into build?
3weeks ago i was 43 in queue. Paid deposit 8th Oct 2018. Should have it end/start of year
Sent from my iPhone using Tapatalk
Re: In an attempt to lose some weight on the Atom 4...
Posted: Thu Jul 30, 2020 9:35 am
by Anon
Exciting times!! as everyone says, you will love it and then some more also Ariel are excellent to work with. Make sure you spec the 350bhp power upgrade - I tried the 320bhp and although very fast the 350bhp upgrade turns the car into an animal.
Re: In an attempt to lose some weight on the Atom 4...
Posted: Thu Jul 30, 2020 10:29 am
by Peter255
simonrhart wrote: ↑Wed Jul 29, 2020 9:32 pm
Sure, I will put together a list of links to the bolts you need with my dodgy drawing tomorrow.
Price wise it was about £195 for the lot. It's a lot of money but the results are much nicer than stock, plus a lot cheaper than at build if you don't mind wrenching yourself.
Nice. Thats massively cheaper than the optional ones from Ariel. Circa 1/3 the price from memory. Good stuff.
Re: In an attempt to lose some weight on the Atom 4...
Posted: Thu Jul 30, 2020 10:39 am
by curvedvision
Great work Simon - thanks for this.
Sent from my iPhone using Tapatalk