Crank Sensor Error

[Sledgehammer]

Hello,
i have some problems with my 2005 SC Atom with KPro4.
Car wont rev more then 3.000 RPM and error P0335 Crank Sensor no Signal popped up.
First i checked the wiring, 12.6V , Ground, Sensor wire from connector to Hondata, all fine.
New Sensor fitted, Error Code cleared (with Hondata software) now error P0336 Circuit Range / Performance.
Rev to 3.000 rpm limited.
Is there a relearn/reset of the sensor to do ?

Thanks

[Sledgehammer]

Problem solved......

Gesendet von meinem BV5900 mit Tapatalk

[John Scherrer]

Great news that you have found the answer!

What did you find was the problem? - Sometimes, the wiring loom has got burnt behind the rear number plate due to not doing a good slowing down lap on track during hot weather.

[Sledgehammer]

The Problem was the Aftermarket Sensor my mechanic bought. It was a 70€ Delphi Sensor that was crap.
I ordered a original Honda Sensor (Denso) 177€ and it works. Lesson of the day....Dont waste your money on Aftermarket parts. The magnetic field of the Denso is two times stronger then the Delphi Sensor.

Gesendet von meinem BV5900 mit Tapatalk