New Project 3.5 360bhp

[HenryJS]

I will also say

If you are interested, we do do a 'stealth' charge cool kit (so no side pods) fits up front where the 'hot country radiator' goes.

good for about 30-35bhp on a blown K24.

[Peter255]

I will also say

If you are interested, we do do a 'stealth' charge cool kit (so no side pods) fits up front where the 'hot country radiator' goes.

good for about 30-35bhp on a blown K24.

Henry

Is that as efficient as the pods, or less so but cleaner looking?

[John Scherrer]

Presumably a lot cheaper !

[Peter255]

Could be a good option for people not wanting pods, but still wanting the extra power.

Sent from my E5823 using Tapatalk

[CAG3D]

I like pods



Sent from my iPhone using Tapatalk

[Karl V]

The side pods are definitely well positioned to take in cold air...

[Alex Brandon-Smith]

The side pods are definitely well positioned to take in cold air...

And lots of other harmless animals...

Sent from my SM-N950F using Tapatalk

[IanG]

Engine ready collection tomorrow morning

[speedmachine]

Omg this looks sweat

Does this fit plug and play?
If you find time could you drop me a pm about pricing? If brexit is going to ruin my atom 4, I want this with a sadev

[autobackup]

Ian

Have you had to do much modification to the engine bay to accommodate the larger 2.4 block?

[IanG]

Hi Paul
Hope all is well
No modification is required to the engine bay
same gearbox the only difference is that the K24 block is 20mm higher
Ian

[Peter255]

More engine porn!

Get it installed and mapped pronto! I want to see and hear it run!

Its going to be MAD!

[speedmachine]

A dutch atom has a rebuild k20 honed to 2.2. He gets 380 hp with big torque (up to 480nm). I guess you should get at least that

[John Scherrer]

Surely, just because it's a 2.4 block with a K20 head doesn't mean it will produce the same power/torque as another built engine with this configuration.

The determining factors will be the compression, fuel injectors, mapping, gas flow efficiency in the head, inlet and exhaust manifolds, valves, valve sizes, cam profiles and timing, turbo efficiency to name but a few.

If MMR have designed their configuration, they will know what power that spec will make, so I expect that 360 will be pretty accurate.

[Karl V]

I'm not sure John.

360 with black head maybe, but now it's yellow?

I'd say 320 max.

;-)