Wheel Alignment setup
Wheel Alignment setup
I searched but somehow i didn't see any wheel alignment setup that i was looking for.
If you have a link for TRACK use AND FOR STREET use WHEEL ALIGNMENT SETUP
kindly post it for me. I need an alignment job.
Thank you
If you have a link for TRACK use AND FOR STREET use WHEEL ALIGNMENT SETUP
kindly post it for me. I need an alignment job.
Thank you
Re: Wheel Alignment setup
https://www.ariel.club/forum/viewtopic. ... er#p287909
https://www.ariel.club/forum/viewtopic. ... er#p278711
https://www.ariel.club/forum/viewtopic. ... er#p270131
https://www.ariel.club/forum/viewtopic. ... er#p266601
https://www.ariel.club/forum/viewtopic. ... er#p261560
https://www.ariel.club/forum/viewtopic. ... toe+camber
A few links depending on what vehicle you have
https://www.ariel.club/forum/viewtopic. ... er#p278711
https://www.ariel.club/forum/viewtopic. ... er#p270131
https://www.ariel.club/forum/viewtopic. ... er#p266601
https://www.ariel.club/forum/viewtopic. ... er#p261560
https://www.ariel.club/forum/viewtopic. ... toe+camber
A few links depending on what vehicle you have
Re: Wheel Alignment setup
Thanks Smokin,
The 1st link is for atom 2, I wonder if the set up can be used for my atom 3?
The rest of the links, I can't see..... "You are not authorised to read this forum"
I guessed its only for paid members?
The 1st link is for atom 2, I wonder if the set up can be used for my atom 3?
The rest of the links, I can't see..... "You are not authorised to read this forum"
I guessed its only for paid members?
Re: Wheel Alignment setup
For Atom 3 - lifted from one of those threads:
CAMBER
front FACTORY RECOMMENDATION -30'
rear FACTORY RECOMMENDATION -45'
TOE (out) - front FACTORY RECOMMENDATION TOTAL TOE 2mm OUT (= -18' on a 15 inch wheel)
TOE (in) - rear FACTORY RECOMMENDATION TOTAL TOE 3mm IN (=. 25' on a 16 inch wheel)
Not sure why they're inaccessible for you - possibly members only but I'm not admin so can't tell
CAMBER
front FACTORY RECOMMENDATION -30'
rear FACTORY RECOMMENDATION -45'
TOE (out) - front FACTORY RECOMMENDATION TOTAL TOE 2mm OUT (= -18' on a 15 inch wheel)
TOE (in) - rear FACTORY RECOMMENDATION TOTAL TOE 3mm IN (=. 25' on a 16 inch wheel)
Not sure why they're inaccessible for you - possibly members only but I'm not admin so can't tell
Re: Wheel Alignment setup
By the way, I forgot to ask.
Do I need to remove my mudguard and stay bracket when aligning the wheels?
They need to attach the aligning unit to each wheels.
Do I need to remove my mudguard and stay bracket when aligning the wheels?
They need to attach the aligning unit to each wheels.
Re: Wheel Alignment setup
It may depend on the type of kit they use. I didn't need to remove them when I had mine done but that may not be the case for all systems
Re: Wheel Alignment setup
FWIW, I believe they need the suspension 'loaded' to check / set alignment, so I'd be surprised if they'd want to jack up the car and take the wheels off.
I am constantly surprised though, so don't take my word for it...
I am constantly surprised though, so don't take my word for it...
Who is online
Users browsing this forum: No registered users and 14 guests