Harness Noise

[meladdo]

Phew - I thought you were gonna recommend he lube up 

Can you remember the dimensions of these CUK?


Looking for a bulk buy from a few suppliers - just need dimensions that best fit - the ring looks like 6mm thick with an panel hole of 16mm and a 12mm cable hole

This correct?

[ChuckUK]

The ones I ordered were 5mm panel thickness, 17mm panel hole, 13mm cable hole.

[CambsBill]

[quote="ChuckUK"]
Maybe out of stock, after a few on here ordering.

Neoprene Grommet Ø 13mm/PT 5mm. ECS SEDA13017050
[/quote]

They are, I had a call about my order today to tell me that they'd had a sudden increase in interest and an order for 100 (have Ariel cottoned on & ordered some?) so the next batch is due at the end of the month.

[Zumbruk]

[quote="meladdo"]
I had a price to plastic coat the eyelet yesterday and minimum order value would be 250 plus vat and delivery for 8 eyelets [/quote]

Have you considered using "Plastidip" on them?

http://www.plastidip.co.uk/

[meladdo]

I may have found a supplier for these - very cheap.......Just hang on I am testing some samples when they arrive 

[smokin]

Hi meladdo, having sorted springs the harness eyelets are next. Have your samples arrived yet?

[meladdo]

[quote="smokin"]
Hi meladdo, having sorted springs the harness eyelets are next. Have your samples arrived yet?
[/quote]


YES! all 15 types and I have found one thats a larger overall diameter so it shields more of the eyelet sides IYSWIM
Fitted to my car and they are very good - tight to fit as the cable (center hole) is smaller at 8mm - but a bit of Vaseline  in the grommet hole make it easy - the trouble is the smaller lap belts have a smaller shackle so a little bit of a tight fit - If I managed it - everyone can. The only thing I cant say is how long they will last....remains to be seen after about 80 miles use I cant see any wear on em - but that's just one run out. The rubber is UV, oil, moisture resistant and fine for long term exterior applications.

I will get a picture up later -

[smokin]

Excellent work meladdo

[smokin]

Just been out to mine with the tape measure. My willans 3" buckles are 12mm so I'll need the 13mm cable hole ones mentioned earlier.

[smokin]

back in stock at ECS  http://www.electricalcarservices.com/Product.aspx?ProductID=404&CategoryID=127&L=1

[meladdo]

[quote="smokin"]
Just been out to mine with the tape measure. My willans 3" buckles are 12mm so I'll need the 13mm cable hole ones mentioned earlier.
[/quote]

So are mine!! the larger holes dont leave much meat between the shackle and the eye they are going in - the smaller hole ones still allow the shackle through - Pic below




I will be back home a week Monday and can get a box of these they would work out at about £60.00 for a box of 100 so 10 people at 10 per car 8 on and two spare? plus P and P of say 2.00 sent first class.

Let us know....no worries if no takers

And the lap belt shackle - these are a little fiddly to fit but they will go with a smidgen of Vaseline ...Keeps the lap belt shackle from digging in your leg as you get in too well if you rear is a bit lardy

[meladdo]

OK IF anyone wants these - to order a box as a minimum quantity I need some takers - for a set 10 of these sent in the UK - I estimate £8.00 all in.

I have a set - as I tested them so we need to cover the cost...

A quick post here and I will order a box Monday 2nd sept and get them out to you......

[Simon]

I'm in.
Simon

[smokin]

ordered mine last week from ECS. Couldn't resist giving them a spray with plasti-dip

[ChuckUK]

Is that a real carbon cover behind ?