Screen To cover the Wing Mirror Aperture.

Post a reply


This question is a means of preventing automated form submissions by spambots.
Smilies
:) ;) :D ;D >:( :( :o 8) ??? ::) :P :-[ :-X :-\ :-* :'( >:D :laugh: ^-^ O0 :angel: :police: :td: :tu: :pop: :doh: :drool: :wize: :H: :rtfm: :fence: :google: :OT: :vroom: :checkeredflag: :embarassed: :faint: :roflp:

BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are ON

Topic review
   

If you wish to attach one or more files enter the details below.

Maximum filesize per attachment: 7 MiB.

Expand view Topic review: Screen To cover the Wing Mirror Aperture.

Re: Screen To cover the Wing Mirror Aperture.

by Lighty » Tue Jul 03, 2018 6:33 pm

Trigger wrote: Tue Jul 03, 2018 12:59 pm I thought about making similar little triangles for the side hole - but how do you attach them and make sure they dont rattle around ? Just 2 cable ties surely dont do the job do they ?

T
The crucial bit is the slit for the mirror stem, if you get this right , the Perspex almost wedges in the hole.
If you look closely you can see there is a black tie around the mirror stem, this would hold it there on its own.

Re: Screen To cover the Wing Mirror Aperture.

by Trigger » Tue Jul 03, 2018 12:59 pm

I thought about making similar little triangles for the side hole - but how do you attach them and make sure they dont rattle around ? Just 2 cable ties surely dont do the job do they ?

T

Re: Screen To cover the Wing Mirror Aperture.

by Lighty » Fri Jun 29, 2018 7:15 am

Just to make those up would be quite easy & they do make a big difference.

Re: Screen To cover the Wing Mirror Aperture.

by Hedge » Fri Jun 29, 2018 6:02 am

Good stuff, Mr L.

I've just the wing mirror gap to fill (got the side panels). Still reckon it'll be worth doing though since, even on the brief rides I've had in Nomads, the buffeting through those alone is quite noticeable. Might discuss with the factory today; I'm due some build pics anyway...

Cheers,
Hedge

Re: Screen To cover the Wing Mirror Aperture.

by Lighty » Thu Jun 28, 2018 9:21 pm

I made my own triangle plexi glass panels & also the main sides as well.
They don’t look as neat as the originals , but I personally wasn’t keen on the welded lugs, & my solution cost very little apart from time.
Now I have the pattern I could knock up replacements quite quickly .
I would buy a proper cutting tool if I did them again though.
The difference they make to the car is unbelievable.
You can’t really go off road without the main panels or you will get absolutely filthy. Also driving anywhere is much more comfy, cuts out the belts buffeting constantly & makes the car quite warm inside.
In fact the interior gets too warm once the temp goes above @20 degrees.
I will try & post some pics.
At 1st I used orange cable ties, but I think it looks better with black & they are easier to get.
Image
Image

Re: Screen To cover the Wing Mirror Aperture.

by Karl V » Wed Jun 13, 2018 2:12 pm

Art added some triangular perspex (I'm thinking of doing the same).

Check out at 5 minutes 40.

Re: Screen To cover the Wing Mirror Aperture.

by StephenCM » Sat Jun 09, 2018 6:16 pm

Full face helmets just take up too much space on long trips to the continent. The full winter cover is overkill so a half way house thats easily carried in the car for the days when you get caught out by the weather Is what I am looking to achieve.

Re: Screen To cover the Wing Mirror Aperture.

by dunny » Fri Jun 08, 2018 3:43 pm

HI
Don't drive in the rain,wait till it snows it's not quite so bad.Failing that a full-face helmet and just go for it!
Dunny.

Re: Screen To cover the Wing Mirror Aperture.

by Hedge » Thu Jun 07, 2018 5:56 pm

Rookie says someone has; I shall ask the factory..

Cheers,
Hedge

Screen To cover the Wing Mirror Aperture.

by StephenCM » Thu Jun 07, 2018 11:39 am

Has anyone tried to seal up this area? As we all know in heavy rain this area seems to act as a funnel to fire rain straight into you face!
Has anyone come up with a solution other than goggles?

Top