by Phantom » Thu Oct 10, 2019 4:58 pm
As promised, here is a picture of my center mirror- I used an 8 X 1.25 coupling nut (black) to join a slightly modified blind-spot mirror to the 8 mm nut already exposed from the top of my windshield- Aesthetically, it looks pretty good- Functionally, it's great!
- 20191006_134118.jpg (3.57 MiB) Viewed 673 times
Also, I found this handy storage bag on Amazon- It's a Polaris Ranger UTV Cab Bag- Note, I hooked the top two mounting hooks on the welded tabs located towards the outside of the vehicle, and behind the seats- I attached the lower mounting hooks to a black zip tie positioned around the two 1" tubes running along the center console- The small pocket on the front of the bag easily holds my cell phone and wallet- The large main compartment currently holds a tool bag, and there's room for more- The fit and finish is as if designed for our cars!
- 20191006_134027.jpg (3.76 MiB) Viewed 673 times
- 20191006_134010.jpg (3.76 MiB) Viewed 673 times
As promised, here is a picture of my center mirror- I used an 8 X 1.25 coupling nut (black) to join a slightly modified blind-spot mirror to the 8 mm nut already exposed from the top of my windshield- Aesthetically, it looks pretty good- Functionally, it's great!
[attachment=0]20191006_134118.jpg[/attachment]
Also, I found this handy storage bag on Amazon- It's a Polaris Ranger UTV Cab Bag- Note, I hooked the top two mounting hooks on the welded tabs located towards the outside of the vehicle, and behind the seats- I attached the lower mounting hooks to a black zip tie positioned around the two 1" tubes running along the center console- The small pocket on the front of the bag easily holds my cell phone and wallet- The large main compartment currently holds a tool bag, and there's room for more- The fit and finish is as if designed for our cars!
[attachment=1]20191006_134027.jpg[/attachment]
[attachment=2]20191006_134010.jpg[/attachment]