Ohlins setup

Post a reply

This question is a means of preventing automated form submissions by spambots.
:) ;) :D ;D >:( :( :o 8) ??? ::) :P :-[ :-X :-\ :-* :'( >:D :laugh: ^-^ O0 :angel: :police: :td: :tu: :pop: :doh: :drool: :wize: :H: :rtfm: :fence: :google: :OT: :vroom: :checkeredflag: :embarassed: :faint: :roflp:

BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are ON

Topic review

If you wish to attach one or more files enter the details below.

Maximum filesize per attachment: 7 MiB.

Expand view Topic review: Ohlins setup

Re: Ohlins setup

by plip1953 » Thu Sep 15, 2022 3:57 pm

Maybe you need helper springs as these will allow more travel on droop/rebound?

Re: Ohlins setup

by HenryJS » Thu Sep 15, 2022 10:58 am

Sounds like you need a trip to see the Belgian dealer! :)

Ohlins setup

by PaulF » Wed Sep 14, 2022 11:25 am

I bought some Ohlins TTX with track springs for my Atom 3. I installed them on the car but could not reach the desired ride heights - pushrods are bottoming out and the car is still 15mm too high.

Took it for a test on a trackday and have issues coming out of corners - inside right wheel lifts, LSD cannot lock and I have no power going to the ground.

Tried changing the height on the dampers but apparently that doesn't work - ride height should be set on the pushrods.

Can anyone give some advice on setup? I never use it on the road so pure track setup. Spring length (unloaded), ride height and corner balancing (cross %) would be a massive help.

Also, I'm running cup wishbones so that might affect things. Think I'll need shorter pushrods.