HELP!! How do I install the alarm in my Atom?

Post a reply


This question is a means of preventing automated form submissions by spambots.
Smilies
:) ;) :D ;D >:( :( :o 8) ??? ::) :P :-[ :-X :-\ :-* :'( >:D :laugh: ^-^ O0 :angel: :police: :td: :tu: :pop: :doh: :drool: :wize: :H: :rtfm: :fence: :google: :OT: :vroom: :checkeredflag: :embarassed: :faint: :roflp:
BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are ON
Topic review
   

If you wish to attach one or more files enter the details below.

Maximum filesize per attachment: 7 MiB.

Expand view Topic review: HELP!! How do I install the alarm in my Atom?

Re: HELP!! How do I install the alarm in my Atom?

by IanG » Sat Jan 07, 2017 7:49 am

There should be a 12volt live with ignition
There is one under the dash a two pin connector black wire /white wire
Also one behind the seat same wire colours
I spoke to the factory yesterday they say it's fuse D 6 20 amp
Hope this helps
Ian

Re: HELP!! How do I install the alarm in my Atom?

by AtomMadStew » Fri Jan 06, 2017 9:17 pm

A wire that becomes live once the ignition is switched on - usually thats on the back of a typical car with the switch on the ignition key barrel - but obviously you have a lack of.
Under the dash maybe or a 12v socket that is live when the ignition is on.
Im sure there is a spare connector somewhere but at present i cant remember where it is - under the dash maybe anyone?
Obviously dont just bodge it in - a nice wrap of heatshrink is always advised on such an open vehicle if its going to be a permanent fixture.

Stew

Re: HELP!! How do I install the alarm in my Atom?

by Rickard » Fri Jan 06, 2017 9:08 pm

That was my guess too, but I don't know where I should connect it on the car. Where is the ignition disable?

Thanks for helping me out

Re: HELP!! How do I install the alarm in my Atom?

by AtomMadStew » Fri Jan 06, 2017 4:44 pm

Sounds like the alarm is still armed when your driving off.
At a guess the 12v to the ignition which is labeled - ignition disable - check this wire first - sounds like 12v to this wire disables the alarm.

Stew

HELP!! How do I install the alarm in my Atom?

by Rickard » Thu Jan 05, 2017 5:26 pm

Hi,

I bought an alarm (SPY 5000), but cannot figure out how to connect it in the car to stop it from going off from vibrations when I drive...  The neighbours are getting sick of it... ;-)

I attach the information that came with it.

Really grateful if somebody can point me in the right direction. Thanks.

Rick
Attachments
2426_001.pdf
(33.23 KiB) Downloaded 35 times
2432_001.pdf
(50.89 KiB) Downloaded 31 times

Top