Hello all,
After I had knee surgery, I came to install just last week.
What should I say ...
The Raptor came in a small box with a short but detailed instruction.
So i started to measure out the wires of my car, which was a little tricky because the former owner made a pretty mess with the wires.
Then i soldered the first few wires to the raptor, put the 2032 Battery in the transmitter and tried the indicators and the horn.
Everything worked great and i had a big grinn on my face!
So i tried to go on with the warning flashers.....
After hours of measuring and trying i couldn make it work....
On the warning flasher button are so many wires which are interacting with even more things that i just couldn`t do it by myself. (for instance:the indicators are not working when the warning blinker isn`t connected..)
But fortunately a friend of mine helped me by soldering a circuit board which takes on the functions of the Flasher Button.
So it works as follows: I Push the Raptor button, the Raptor sends it to the receiver, the receiver to the circuit board and from there to the single indicators!