Ariel.Club Forum

To clarify - Rskdsk's "length answers" presumably refer to Capblaster's "Length of Dipstick Tube" thread!

it's a long shot but have you asked TMI if they have any laying around?

u the man. thanks

BTW my car is  a 2006 brammo 2 245hp

Mine is 18 3/4 " long  .  That is the metal portion up to the rubber plug ... the rubber plug is another 1 ".  So the total length inside the tube is 19 3/4 "

[quote="silver"]
did it work, were they able to remove / install the correct pulley?
[/quote]
Pulley did work, much appreciated.
Thanks
cap

did it work, were they able to remove / install the correct pulley?

[quote="benyeats"]
[quote="capblaster"]
[quote="silver"]
I gave him mine last night, and a pulley installer so he should be good to go.

he has a TMI ariel atom experience car and they were all 245's and I had my 245 since I have upgraded to the harrop
[/quote]
Big thanks to Silver... Also, thanks to Spanky for offering me his, I just had already picked up the one from Silver.
Also, Silver, getting new fuel gasket like you suggested.
[/quote]

Good stuff and what the forum and Atom ownership as a whole should be / is mainly about
Ben
[/quote]
This is why i see the 20 bucks as a good deal for the club/forum, even for a US member. That being said, I still need to renew.

[quote="capblaster"]
[quote="silver"]
I gave him mine last night, and a pulley installer so he should be good to go.

he has a TMI ariel atom experience car and they were all 245's and I had my 245 since I have upgraded to the harrop
[/quote]
Big thanks to Silver... Also, thanks to Spanky for offering me his, I just had already picked up the one from Silver.
Also, Silver, getting new fuel gasket like you suggested.
[/quote]

Good stuff and what the forum and Atom ownership as a whole should be / is mainly about
Ben

[quote="silver"]
I gave him mine last night, and a pulley installer so he should be good to go.

he has a TMI ariel atom experience car and they were all 245's and I had my 245 since I have upgraded to the harrop
[/quote]
Big thanks to Silver... Also, thanks to Spanky for offering me his, I just had already picked up the one from Silver.
Also, Silver, getting new fuel gasket like you suggested.

I gave him mine last night, and a pulley installer so he should be good to go.

he has a TMI ariel atom experience car and they were all 245's and I had my 245 since I have upgraded to the harrop

[quote="Nicholas"]

Please measure yours, and I'll measure mine to confirm that they match.

[/quote]
 

I have the pulley off of a 245 spare.

Please measure yours, and I'll measure mine to confirm that they match.

Nick.

I have the brammo stage 2 and brammo stage 3. you can have either as well.

To exactly match what you had before you need the stage 2 b/c yours was built as a 245.

none of the aftermarkets are going to exactly match your original pulley size, BUT, the differences of an after market pulley are

1:  the hub can be mounted once then different sized pulleys can be used to make more / less hp without having to pull the hub off again therefore you just remove some set screws and your pulley will come off.

2:  your tune isn't that good anyways, so if you got a different sized pulley you could retune the car anyways. (but that costs more money)

I have a used but still in great shape pulley from Brammo. It has the 3 punch marks to identify its' size. You can have it for free if you want to come to Euless to get it.